Make it Soft to the Touch
Tshirts have become an integral part of today’s fashions, and a common item for companies to advertise or promote their business or brand. One of the popular trends in tshirt design is to use softer materials and imprinting methods that are soft to the touch. The goal is to have an imprint that doesn’t feel like a plastic sticker, but retains the softness of the material as much as possible.
At The Creative J, we have numerous imprinting and decorating techniques available which gives us the ability to offer our customers unique and memorable ways to design their apparel. To achieve an imprint which retains that soft, almost worn feel, even when the design covers a lot of area, there are three main methods to use. Below are some of the options and details about each:
Using regular Plastisol inks without an underbase can achieve a more worn look with a slightly softer feel.
Depending on the color of the shirt and the ink colors being used, the imprint can have a vintage/worn look with a slightly softer feel since there is not a layer of white underneath. There will still be a detectable imprint to the touch.
Imprints will retain their detail within the limits of standard screenprinting.
Either the same or a bit less in some cases than standard printing.
No restrictions other than those for standard printing (usually 12, depending on imprint colors and locations)
An additive is mixed with regular Plastisol inks to achieve a softer feel. After washing the shirt, you won’t be able to feel the imprint.
The imprint will have a more transparent, washed-out look, which will allow the color of the shirt to show through. For this reason, printing a dark imprint on a dark shirt will not work as well since the shirt color will overtake the imprint color. However, if printing a lighter color on a dark shirt, the imprint will have the worn, distressed look of a vintage tshirt.
|Fashion Base Print|
Since Plastisol inks hold good detail, imprints will retain their detail in finer areas.
A bit more per imprint color and placement than standard inks, but still an affordable option.
Since inks need to be specially mixed and cannot be saved for later use, there is a minimum of 48 pieces.
Water Base Inks
These inks have a softer hand to them then standard Plastisol inks and has a softer look to the imprint also (colors will not be as bright).
The imprint will be a bit more transparent than standard inks and does not print well on white underbases, so works best on white or light colors. Pantone colors will appear a bit lighter than they appear in color books, so if you want bright, vibrant colors, waterbase is not the direction to go.
Since the ink has a tendency to dry more quickly, there can be a loss of detail in some fine areas.
Usually no extra cost to run waterbased inks.
No higher minimums than standard printing.
Discharge ink is the process and waterbased ink used for dark garments. It’s extremely soft when compared to standard inks. It uses a chemical which bleaches the dye from the garment before depositing the ink pigment on the material.
After washing, the imprint will feel just like the garment’s material. Imprint colors can be vibrant since the garment color does not show through the ink. Only SOME 100% cotton garments will work for this process. Some rich colors such as royal blue, red, purple, etc. can be very unpredictable as the inks can become contaminated by the shirt dye. When used on the right type of garment, it has a wonderfully soft and vibrant appearance.
Since these are waterbased inks, fine details may appear soft or fill in some due to drying issues.
Due to the special mixing of inks with chemicals, they must be used right after mixing. In addition, the chemicals tend to break down the screens, which depending on the size of the order, can require additional screens. Therefore, the cost for discharge is much higher than standard inks. You can figure an extra $.60-$.75 per imprint color, per location for discharge.
Due to the factors above, discharge printing using requires a minimum of 72 pieces or more.
Using the methods above, along with other techniques and decoration methods, we can help you to create a tshirt design that will stand out from the rest.